Carro de la compra

No hay artículos en el carro

No hay artículos en el carro

Youmile Signal Generator Module Función monolítica Forma onda ICL8038 Kit bricolaje Triángulo sinusoidal Señal onda cuadrada Salida DC 12V 7KHz-50Hz Frecuencia ajustable + Jack Cable

Envío gratis en pedidos superiores a 25.99€

9.79€

4 .99 4.99€

En stock

Acerca de este producto

  • Con un excelente rendimiento del generador de funciones de chip ASIC ICL8038, agregue una pequeña cantidad de componentes resistivos y capacitivos, puede producir ondas sinusoidales, triangulares y cuadradas, y la frecuencia de la señal, ciclo de trabajo, onda sinusoidal de distorsión ajustable.
  • Algunas partes del generador de señal solo tienen un potenciómetro para ajustar la frecuencia. Si desea obtener con precisión una determinada frecuencia, no es fácil de ajustar. Este kit agrega un potenciómetro para el recorte de frecuencia, lo que facilita la obtención de frecuencias precisas.
  • Requiere una cierta habilidad de bricolaje, necesita soldar el kit usted mismo.
  • Rango de frecuencia: 50Hz - 5KHz;Ciclo de trabajo: 27% - 63% (onda cuadrada).
  • Manual de usuario: https: //bit.ly/3fpUpyt


Specifications:
Supply voltage: 12V DC
Working current: 9mA
PCB board size: 2.0 x 1.5"
ICL8038 pin functions:
1 foot, 12 foot: sine waveform adjusting terminal;
2 foot: sine wave output;
3 foot: triangle wave output;
4 foot, 5 foot: the frequency and duty cycle (or waveform asymmetry) adjustment;
6 foot: V +, the positive power supply;
7 foot: offset; 8 foot: frequency adjustment input terminal;
9 foot: square wave output.
This is an open collector output terminal, work should take a load resistor to the corresponding positive power supply terminal from the pin, to get a TTL-compatible square-wave output, the load resistance must be connected to + 5V power supply;
10 foot: timing capacitor terminal;
11 foot: V-, negative power supply terminal or the ground. Use positive and negative power supply, 11 feet to the negative supply, the output waveform are symmetrical with respect to 0V; use a single positive power supply, 11 feet grounded, the output waveform is unipolar, uniform voltage is + VCC / 2;
13 feet, 14 Feet: Empty foot.
Package Includes:
1 set function signal generator module and electronic kit (Note: the batch color may vary, the board color may be biased, hope to understand)
1 x 12V DC Power Male Jack Connector Cable


Leo Poldi
Reseñado en Alemania el 5 de marzo de 2024
Für den Zusammenbau brauchts gute Augen oder/und eine Lupe. Die Bezeichnungen auf der Platine sind eindeutig, die Lötarbeiten sind in 15 Minuten erledigt. Über die Genauigkeit kann man diskutieren - ein paar Herz Unterschied zwischen Messgerät und Generator (beides keine geeichten Geräte). Der Temperaturgang ist okay. Fazit: für die meißten Zwecke vollkommend ausreichend.
Reseñado en Alemania el 3 de abril de 2024
es ist noch nicht mal ein SCHALTPLAN dabei!!!
dennis k thomas
Reseñado en el Reino Unido el 2 de octubre de 2022
Although it took a little time to dial everything in on the oscilloscope the wave forms are clear and easy to find. Everything is there and easy to follow and there are pictures on the Internet for more clarity.
Cliente
Reseñado en Italia el 21 de mayo de 2021
MANCANO LE ISTRUZION I
Productos recomendados