No hay artículos en el carro
No hay artículos en el carroDescripción del producto
ピレネー
Reseñado en Japón el 5 de marzo de 2024
使い様では長い釘も抜けます。
Josh Feldmann
Reseñado en Estados Unidos el 7 de octubre de 2024
I bought this to pull nails on an old metal roof. I can tel you that it does not work for that. The claw is too thick and can’t get under nails. But does work great when the nails are slightly raised. And by it works I mean it’ll chuck the nail into the next state if you’re not careful.
Taylor James
Reseñado en Estados Unidos el 1 de junio de 2023
No se ha podido cargar el contenido multimedia.
James A. Medema
Reseñado en Estados Unidos el 24 de marzo de 2023
I purchase the nail remover to help disassemble pallets which, because of the twisted shank nails that were hammered into mostly hardwoods, were a royal PIA to disassemble. It was when I had to resort to a 2 1/2' pry bar for the worst nails that I realized I was working too hard.I first bought the nail "shooter" which pushed nails back through from the sharp tip and THAT tool was simply amazing. However, when I only had access to the *head* of the nail it was no good. I then got this tool and here's what I found:(1) You will need to have pryed out the nail at least ½" (preferably more) in order to get this tool's "claw" into position and have a chance at success.(2) Crank up your psi to the tool to the max recommended - 120PSI. Any less and your chances of removing the really stuck nails goes way down.(3) Because the upward ramming against the nail head is what is needed, if you don't have at least that ½" of space, it just won't work. SO, you may need to pry the nails a little more if the tool isn't having any success.(4) Smooth shank nails should be a breeze assuming, of course, a minimum of ½" gap (preferably more). That said, longer nails in harder wood will always be more of a challenge(5), the tool will leave indents in the wood as it "shoots" the nail up and out. Be aware of this if you want to preserve the surface of finer woods.(6) The tool is amazing, truly, if you remove a lot of nails. I was able to complete in 45 minutes what first took me 4 hours and a lot work and pain.SO, it is worth it? I am going to be making crafts with old pallet wood so I anticipate using the tool frequently. For me, the answer is yes. If I were to use it infrequently, the $150-ish price I paid would be a little steep.
Customer
Reseñado en Canadá el 7 de diciembre de 2022
I was amazed at how well it worked. If the nails are really old it sometimes pulls the nail head off. I pull apart alot of things to recycle and this has pulled out a ton of nails! I am sooooo happy I bought this. I recommend this to everyone as this has really saved my shoulder!
Productos recomendados