No hay artículos en el carro
No hay artículos en el carroWinni
Reseñado en Alemania el 7 de febrero de 2025
Passt perfekt , gibt keinerlei Probleme
Athus W.S
Reseñado en España el 1 de julio de 2024
Amo o fato que não é feito em impressora 3D, isso é uma tradicional peça clássica inteirissa de plástico uwu
Taplow
Reseñado en España el 30 de diciembre de 2024
Compacto y util para conectar un dispositivo de 3.5 pulgadas en una bahia de 5.25. Muy adecuado.
JOSE ANTONIO JUNQUERA RODRIGUEZ
Reseñado en España el 28 de octubre de 2024
StarTech.com Juego Kit Adaptador Frontal Abierto Unidad tiene Unidad grande
たかちゃん
Reseñado en Japón el 15 de octubre de 2024
満足しています
Serious Shoppers
Reseñado en Emiratos Árabes Unidos el 13 de julio de 2023
I wanted metal but the prices were outrageous, this is plastic but it's sturdy and gets the job done efficiently and economically.
Luis Arjona
Reseñado en España el 27 de diciembre de 2023
Tuve que limar un poco los bordes interiores ya que el dispositivo que iba a instalar dentro no asomaba al 100% para dejarlo al mismo nivel del frontal.Por lo demás buen material y buen producto.
Carlos F.
Reseñado en España el 16 de septiembre de 2023
De plástico resistente, por este precio no se puede pedir más. Incluye cuatro tornillos para instalar el dispositivo, en mi caso, una unidad zip IDE. Queda bien anclado a la bahía del PC, es sólido, no se mueve. Volvería a comprarlo.
MarioEme
Reseñado en España el 13 de noviembre de 2020
Un adaptador sin más que cumple su función. no es la típica chapa de aluminio. Esta es más robusta y no se dobla al atornillar. Los agujeros no se pasan.Cumple con lo que es y a un precio excelente
Eduardo Estrada
Reseñado en México el 29 de diciembre de 2018
Lo utilice para sustituir el DVD y colocar un lector de tarjetas interno, excelente producto quedo justo en la bahia de 5 1/4", me es mas útil para los diferentes tipos de tarjetas de almacenamiento.
Jose Francisco Vidal Sierra
Reseñado en España el 8 de febrero de 2016
Buscaba un adaptador sencillo para un lector de tarjetas 3,5" a 5,25". El montaje del lector sin problemas, con los cuatro tornillos que vienen. El problema, al menos en mi torre, es que quedaba perfectamente encajado por la parte donde tengo las pestañas para fijarlo, pero por la otra parte quedaba totalmente suelto. La solución bricomaniaca, porque no tenía ganas de devolverlo y a lo mejor era un problema de mi torre, era que aproveché dos tornillos que venían con el lector (?) y lo fijé por la otra parte al chasis. Solucionado.
Zombie Dad
Reseñado en Estados Unidos el 13 de junio de 2015
PROS:* Affordable and well built* Plastic construction seems to be durable, yet flexible* Thick enough that it shouldn't easily break, but my all my screws I had fit ok.* Had all the holes where I needed them which is always a plus* Comes with four mounting screws to mount the adapter to your case. (You provide the screws needed to mount your drive or other device to the adapter. These mounting screws typically come with your drive, front panel hub, card reader or whatever else you're installing)* 2 Year Warranty* The black color matches my Anker USB 3.0 hub and case perfectly.CONS:There really isn't much I'm displeased with, but here are a few things worth mentioning.- There is a slight gap around the Anker USB hub I installed in this. Not major, but if you're expecting a very tight "force it in" fit you might not get it with all devices. I'm worried it might let some dust in but time will tell.- I've read some people have issues with the plastic being too thick for their drive mounting screws. I mention it here but had no issues myself. If there is any issues I suppose you could always get longer screws, remove any washers, or countersink holes slightly if you need to make short screws work.- This is plastic so if you force things I'm sure it will break.- The mounting screws to mount the drive adapter to the case are those sort of "self-tapping" screws or sheet metal screws that chew into the plastic to make their own threads and secure the plastic. In my experience these work fine a few times, but the plastic typically won't hold up if you constantly remove and reinstall them. If you're one of those people that constantly changes things around and builds new computers from existing parts it's something to be aware of. I'm sure you'd have to remove and reinstall this adapter many many times before you chewed the plastic up so much the screws wouldn't hold.Product Dimensions:8Height 1.1 in [28.6 mm]Length 5.7 in [146 mm]Width 5.3 in [133.4 mm]..MY EXPERIENCE:I purchased this to install a to add USB 3.0 ports to the front of a computer. It worked nearly perfectly for this use. The USB 3.0 front panel was being installed in an unused 5.25" optical drive expansion bay on a retail HP computer. I needed a 3.5" to 5.25" drive adapter that looked great but had a low profile face and didn't stick out very far. This was necessary to allow the USB ports to be tucked back behind a drive bay door cover to maintain a stock appearance while still providing access to the ports.This mounting adapter fit fine in the stock OEM case's 5.25" drive bay and mounted without issues. The adapter comes with 4 screws to mount it to your case's drive bay. Since this was a stock OEM HP case you can't easily remove one side and so I could only use two of the mounting screws but that's all that is necessary to keep things from sliding around.The ANKER USB 3.0 front panel hub fit with some room to spare. The USB front panel hub doesn't completely fill the hole for the 3.5 inch drive so there is a slight gap around the hub sides and top between the USB hub and the adapter. It's not a huge gap, it looks somewhere between 1/32" to 1/16", but it's enough to notice light and see through when out of the case. When everything is installed in the case I don't really notice the cap at all. This doesn't bother me. Since this is a "one size fits most/all" adapter you can't expect a light tight perfect fit. I could have evened up the gap between the bottom and top by using some washers as spacers on the bottom mounting points. I also could have used some sort of black trim on the inside to really seal this off but I didn't take the time. I'm a little worried about how much dust the gap would let in but this install hides behind an HP optical drive bay expansion bay door cover. The gap doesn't bother me much but I thought I'd mention it. I'd much rather have a little extra room and NOT need to get out files, grinders or sandpaper to make things fit so I won't complain.I didn't have any issues with mounting things up. Screws were just long enough to safely secure everything. It doesn't take much. We're not bolting down jet engines here ;)I'm uploading plenty of images but there really isn't much more to say. Based on the price, fit and final appearance I can definitely recommend this adapter.
Juancar
Reseñado en España el 6 de noviembre de 2012
Muy útil si tu el chasis de tu PC no tiene bahías de 3,5 y es cada vez son más las cajas que no lo incorporan a pesar que existen numerosos dspositivos que se instalan en esa bahía.El adaptador a primera vista no es muy robusto pero es lo suficiente para montar en él cualquier cosa, yo lo he utilizado para instalar un frontal USB 3.0 de ASUS y ha encajado a la perfección.Incluye 4 tornillos para fijarlo al chasis.
Productos recomendados