Aufrüsten meines MacBook Air 2017 hat super funktioniert.Das der Adapter zu dick aufträgt und die Unterseite sich nicht mehr verschließen lässt kann ich nicht bestätigen. Bei mir hat alles gepasst. Ebenso die Passgenauigkeit der Schraubenbohrung. Vielleicht wurde hier aufgrund der schlechteren Rezessionen nachgebessert.Verwendet wurde ein aktuellerCrucial P3 1TBMacBook Air 2017 (MacOS Monterey)Boot Stick mit MacOS Mojave, erstellt mit Windows.Festplatte musste nach dem Bootvorgang über das Festplattendienstprogramm lediglich formatiert werden und war dann auch verwendbar für die Installation.Alles machbar für jemanden der sich mit so etwas eigentlich nicht auskennt.

Sur un vieil iMac 5K de fin 2015, j'ai voulu supprimer le Fusion Drive d'origine pour avoir un vrai SSD de taille raisonnable pour le système et garder le HDD d'origine pour du stockage.Mais la carte mere de l'imac possede un connecteur particulier, qui n'est le M.2 des SSD NVMe standards.Cette adaptateur n m'a permis de mettre un disque M.2 Samsung 970 EVO Plus dans mon iMac sans aucun souci (hormis qu'il faut démonter tout l'iMac pour pouvoir accéder au SSD d'origine et pour le remplacer, mais ça c'est la faute d'Apple)L'adaptateur est conçu pour que le trou de fixation du nouvel SSD coincide avec le trou de fixation d'origine, et du coup cela se monte sans aucun problème.Si vous voulez faire la meme chose, pensez à installer un Mac OS recent (Mojave ou plus recent) sur un disque dur externe ou un clé USB afin de pouvoir installer le système sur le nouveau disque dur (les disques NVMe ne sont pas reconnus avec les systèmes antérieurs) et aussi, bien prendre un disque NVMe et pas SATA (les deux existent au format M.2, bien faire gaffe)

Compre 2 adaptadores distintos de otras marcas y ninguno me funciono correctamente con mi macbook pro 2015 de 15 pulgadas, Este si y en particular Lo estoy usando con un Ssd Nvme Patriot P300 de 1Tb, Y ningun problema.

Perfecto para Upgrade Fusion en iMac 2013-2019

Funciona perfectamente con iMac 27" de 2017 junto a un SSD M2 de Crucial P3 2TB (pese a no aparecer en la lista de compatibilidad). Alcanza velocidades de lectura y escritura máximas según especificaciones de Crucial. ¡No te olvides de activar compatibilidad con TRIM!

this product is great for upgrading Mac. it definitely and Affordable option to upgrade my Mac.

El adaptador ha funcionado perfectamente junto a un Crucial P3 de 4TB instalado en un Macbook Pro 13 modelo Early 2015.

Bought this and a Crucial P1 500gb hdd as Amazon indicated they were often bought together, and Crucial P1 was listed on one of the photos. However after spending half a day trying to various ideas to get it to work with the adapter I gave up. Next day bought a Samsung EVO 970 500gb hdd from a local store, as this was one used in a YouTube video demonstrating the setup of the adapter, and it worked immediately.

Instalado sin problemas con un SSD de 2TB de Intel en un Mac Pro Trashcan

por ahora funciona bien en imac 27 late 2015. tuve un problema con el tornillo, que no casa con la placa base.seguiré informando.

Lo he instalado junto con un WD SN750 de 500 gbs, por 130 euros pasas de 128GB a 500gb...increible! ademas va mas rapido que el de serie.

Ordered two a while ago.. and Amazon didn't ship both.Vendor responded quickly to my complaint and shipped out missing adapter quickly. I couldn't ask for better service.I'm also pretty sure they've added more guidance to the product listing (this Amazon listing) about supported hardware and troubleshooting since my original purchase, so nice to see them continuing to add to their support documentation.I'll waste some of my plentiful shelter-at-home time with installation tips and my detailed experience with these adapters below.. but I'll wrap up the short-version of my review by saying...Bought two already and I'm ordering more to upgrade additional 'retired' iMacs that have come into my office (University IT Support). There's plenty of usefulness in a 2015 17" iMac after it's got a new NVMe drive in it.Long Version...Installation is not trivial, but that's because of how iMacs are designed and assembled.Read a tear-down webpage, take your time and don't force the screen. They're not that hard to crack (I've done it.. and I'm a professional ;-P ).I find, in addition to a plastic cards (old gift card or similar works well).. I like to use an Exacto Knife so carefully slice through the adhesive foam gasket (slowly slice down into gasket in increasingly deep passes, don't jam blade between glass and case).I also like using increasingly thick guitar picks as shims as I work around from top->down sides.. and look for pull-away tabs at outside of bottom gasket section on newer iMacs.Even thought you have to completely gut the iMac's insides to get to the SSD interface on the back of the board, the actual installation of this adapter is easy so I gave it 5-stars.Oh yea, if you don't want to buy a replacement gasket kit.. don't use double-sided tape instead. It's not thick enough to make contact with screen and case. just wrap some tape around outside edge of glass and case.As for how will it works... Pick a supported SSD, avoid the Samsung drives that they warn against using.. and it just works. You can't ask for more.My own results are mixed so far. .but I don't blame Sintech.. and I believe they recently posted a fix for the one issue I'm still having (I'll try today).- 2017 27" iMac: Even though this isn't listed as a supported Model, the adapter works fine in my 2017 iMac.Before upgrade, it was unstable and I noticed some serious errors with the Fusion Drive B-Tree structure, so I pulled both the disk & Apple SSD and upgraded to a FireCuda NVMe drive. Instability persisted but cleared up after I also pulled a pair of 3rd party SO-DIMMs. I suspect both Fusion Drive issues (which Crash Logs pointed to) and a bad pair of SODIMMs both contributed to original problems. iMac runs better than new now (though still short some RAM).- 2015 27" iMac: Again, I replaced a fusion set that was causing problems in this iMac. This iMac also seemed to be having problems with it's Fusion Drive setup prior to upgrading.Installation and clean-install on new drive went flawlessly and iMac worked great.. except it then started crashing when going to sleep. I've since seen new info here on a possible fix so I'll give that a try.. though it'll take me a while to confirm the issue is gone since it was an intermittent problem.No indication that there's a problem with the adapter/drive while the computer is in use though.One thing to note if you plan to replace a Fusion drive set with this...If you use CarbonCopy Cloner (or presumably Disk Utility too) to clone your Fusion drive Volume to a disk image or to your new NVMe drive, it clones the 2-drive Fusion formatting too. You'll end up with two partitions on your single NVMe.. with one staging new & frequently-used data.. and older data getting migrated to the 2nd partition. It'll look like one Drive from the Finder, but I have suspicions that Apple's data staging code is introducing corruption into Fusion Drive's directory B-Tree so best to not introduce this un-needed complexity.Better options...1. If you've got.an up-to-date TimeMachine backup.. do a clean Mac OS install onto new drive and a data migration from your TimeMachine backup..or...2. Get an external USB NVMe adapter or NVMe USB case..Do an internet recovery (boot w/ Command-R pressed) and install a clean version of MacOS onto the new NVMe drive (usb-connected)..Boot off the NVMe drive and update to latest OS if you need to (I've seen Internet recovery install latest Mac OS release on some Macs, and older versions on others)..Now, do a Data Migration from the Fusion Drive set to the new NVMe.When it's all setup.. then pull the iMac apart and swap the drives.Good luck.. Steve.

Instalado en un iMac (Retina 5K, 27-inch, 2017) 18,3 sin problemas con un Samsung EVO 970 1TB.Buenas velocidades .