No hay artículos en el carro
No hay artículos en el carro 1. Nombre del producto: Pierce DB9 macho a FC10 pin serial cable.
2. Longitud de cable: 0,3 m.
3. Interfaz: pin DB9 (conectado a la cabecera hembra DB9 estándar); conector FC10P (conectado al puerto COM de 9 pines integrado).
4. Alambre: cable de color 9P de alta calidad, conductor de 7 x 0,12 mm.
5. La definición de cada pin del puerto serie de nueve pines: ① Detección de portadora DCD; ② Datos de recepción RXD; ③ TXD envía datos; ④ Terminal de datos DTR listo; ⑤ Cable de tierra de señal SG; ⑥ Datos DSR listos; ⑦ Solicitud RTS para enviar; ⑧ CTS claro para enviar; ② RI.
6. Puerto COM, la mayoría de las placas base se extienden con un puerto de comunicación COM de 9 pines. Cuando desee utilizar el puerto serie para la comunicación de datos, pero no puede encontrar el puerto serie DB9 en la interfaz externa de la placa base, puede utilizar este cable para conducir un puerto serie DB9 pin estándar.
7. Cantidad del paquete: 2 x COM 9-pin a RS232 cable serial
Paul
Reseñado en el Reino Unido el 22 de enero de 2024
These well-made cables allow you to connect DB9-terminated devices to retro computers. The multi-coloured ribbon cable has a 9-pin connector on one end and a 10-pin header socket on the other. Each end is a simple IDC design that is, however, fit for purpose.You could easily source the components to make your own cables for a lot less, but for simple convenience these work well and can be easily cut to length and re-terminated should you so desire.
A Customer
Reseñado en el Reino Unido el 22 de diciembre de 2023
Price at time of review £12.99So this is a cable for attaching to a PC motherboard serial header. to provide an external RS232 serial port.What's most interesting about this product is that the cable is 1.8m long which is much longer than most people would need inside their PC case I would expect. It does allow you though to break the cable out through the outside of the case and connect it to your peripheral device if you don't want to mount it on the back panel of the PC.This comes as a two pack and so might be more suitable for use with industrial or retail PC's that need serial ports externally rather than a home computer.The product appears to work and has reasonable construction with a ribbon cable sandwiched between two connectors at each end.My gripe is that a PC motherboard serial header typically has one pin missing and then the plug block has a hole blanked out so that you can be sure that it is being properly orientated on a PC motherboard and you don't connect it the wrong way.This cable connector doesn't have any such blanked hole so you don't really have any way of knowing which way to connect it and you might have to try both ways round before you get it, which can be a pain if you have to remove expansion cards to get to the serial header of your PC motherboard.As far as I know this blanked off pin is an accepted standard and is present on all PC motherboards so it is a bit weak that this cable doesn't have that which is why I reduced this review to four stars.Its a fairly specialist item so I think that is reflected in the price as this is not a mass consumer cable product.
Productos recomendados
