No hay artículos en el carro
No hay artículos en el carro Overview
Mini Base Board (A) Designed For Raspberry Pi Compute Module 4
Feature
1. USB--USB 2.0 × 2,USB 2.0 × 2 (via FFC connector)
2.HEADER--40PIN GPIO × 1,M.2 slot × 1.
3.HDMI--HDMI × 1,HDMI × 1 (via FFC connector),supports 4K 30fps output
4.DSI DISPLAY--MIPI DSI display port × 1(15pin 1.0mm FPC connector)
5.CSI CAMERA--MIPI CSI-2 camera port × 2(15pin 1.0mm FPC connector)
6.POWER INPUT--5V
7.FAN--5V,no fan control
8.ETHERNET--Gigabit Ethernet RJ45
9.CM4 SOCKET--suitable for all variants of Compute Module 4
10.SD CARD SLOT--MicroSD card socket for Compute Module 4 Lite (without eMMC) variants
11.DIMENSIONS (MM)--85.0 × 56.0
Note
1: This model only supports a 5V fan and cannot work with the 12V fan. Please confirm the fan voltage before connecting.
2: The DSI Display Port is connecting the DSI0 interface of the CM4, and doesn't use the DSI1 display interface.
3: The Type C interface can be used for the power supply or USB SLAVE interface for burning the image.
4: In order to ensure the normal power supply of CM4, please do not connect other devices when using the Type C interface to burn the image.
5: It needs to use a 5V 2A power supply for CM4. Otherwise, problems such as automatic shutdown, frequency reduction, etc. may occur.
6: When using the M.2 interface, please use the matching screws. Using screws of other lengths may cause the CM4 core to be damaged by the screws.
7: The module doesn't have any protection circuit, please do not short-circuit the power supply.
8: USB2.0 is closed by default, if you need to open it, you need to add dtoverlay=dwc2,dr_mode=host in config.txt.
9.HDMI1 uses a flat cable output, if you need to use it, you can purchase an HDMI adapter.
10.This expansion board does not support the POE function.
Package Content
CM4-IO-BASE-A x1
Screw
Max MC C.
Reseñado en Italia el 12 de julio de 2024
SD card not working, have to use an USB adapter
Productos recomendados
