Carro de la compra

No hay artículos en el carro

No hay artículos en el carro

Geekworm KVM-A8 PCIe versión para Raspberry Pi 4 Model B KVM Over IP

Envío gratis en pedidos superiores a 25.99€

100.89€

40 .99 40.99€

En stock

Acerca de este producto

  • 【What is it】This is a kit providing a KVM over IP solution for Raspberry Pi 4 8GB/4GB/2GB, which can control a computer using a web browser!
  • 【Compatibility】for use with Raspberry Pi 4 Model B 8GB / 4GB / 2GB / 1GB only (not support RPi 3)
  • 【Function】remotely turn on/turn off/restart your computer; configure the UEFI/BIOS; reinstall the OS using the Virtual CD-ROM or Flash Drive; remote use your keyboard and mouse; Simulate a keyboard, mouse, and a monitor and presented in a web browser, etc.
  • 【How to Power】POE Power (recommended), or DC 5V3A PSU power via USB-C port of X630-A8 (Refer to ASIN B09J4V3RYK)
  • 【How to Cool】X630-A8 comes with an active cooling fan to cool the raspberry pi
  • 【What included】1 x X630 HDMI to CSI-2 modules, 1 x X630-A8 expansion board and other accessories, refer to the packing list picture for details
  • 【Extra needed (not included)】Raspberry Pi 4, TF card, power adapter (only requires it if no POE power)



Descripción del producto

Geekworm PiKVM

Nota: Raspberry Pi 4 no está incluido en la lista de empaque.

[Visión general]

Este es el kit de versión PCIe KVM-A8 que proporciona soluciones KVM-Over-IP basadas en Raspberry Pi 4. Se inserta directamente en la caja de la computadora como una tarjeta PCIe, muy conveniente de usar y no requiere cables adicionales. Es decir, puede poner una computadora en su computadora.

Este kit se compone de las siguientes piezas:

  • Módulo X630 HDMI a CSI-2 (para captura de video)
  • Placa de expansión X630-A8 (para entrada de alimentación de control POE, RTC, ATX, etc.)

[Características]

  • Diseñado especialmente para KVM sobre IP basado en Raspberry Pi 4
  • Instale como cualquier tarjeta PCI en una torre / PC de escritorio
  • Acceso de red remoto confiable a servidores y computadoras
  • Captura HDMI Full HD basada en el chip TC358743 (de X630)
  • Teclado y ratón OTG; Emulación de unidad de almacenamiento masivo
  • Hardware Reloj en tiempo real (RTC) con toma de batería tipo moneda CR1220
  • Equipado con ventilador de refrigeración en X630-A8 para disipación de calor de Raspberry Pi 4
  • Equipado con fotoacoplador para proteger los pines RPi GPIO de picos de computadora y ESD
  • Diseñado para usar un solo cable Ethernet para transmisión de datos y energía (POE)
  • Reserva el conector PH2.0-4P para pantalla OLED I2C

[Cómo potenciar]

  • Compatible con PoE: alimentación a través de Ethernet para una instalación simplificada
  • También es compatible con la alimentación a través del puerto USB-C de X630-A8, recomendamos el adaptador de corriente Geekworm 5V 4A 20W (ASIN: B09J4V3RYK)
PiKVM-A8 PiKVM PCIe

[Lista de empaque]

  • 1 módulo X630 HDMI a CSI-2 con accesorios
  • 1 placa de expansión X630-A8
  • 1 placa adaptadora de cámara X630-A8-CAB
  • 1 cable de control ATX (52 cm / 20.47 inch de longitud)
  • 1 x USB 2.0 interno de la placa base Conector hembra de 9 pines a cable USB OTG TYPE-C (50 cm / 19.69 inch de longitud)
  • 1 cable USB 3.0 IDC a TYPE-C USB OTG (45 cm / 17.72 inch de longitud)
  • 1 soporte de E/S de tarjeta adicional PCIe de altura estándar
  • 1 cable HDMI (30 cm / 11.81 inch de longitud)
Raspberry Pi PiKVM

[Cómo conectar KVM-A8 a su PC]

PiKVM A8 PCIe Raspberry Pi 4

Antoine Viallon
Reseñado en Francia el 2 de enero de 2025
Thank you very much. I did not expect it to work that well.
Markuss
Reseñado en Alemania el 16 de enero de 2025
Everything in the box arrived, I got revision V1.8. After few hours of putting everything together and putting it in my PC, it works very well.
Kay
Reseñado en Estados Unidos el 23 de agosto de 2024
I recently added the Geekworm KVM-A8 PCIe kit to my Raspberry Pi 4 setup, and I couldn’t be more satisfied with the results. This kit offers an incredibly convenient and efficient way to remotely control my computer, all through a simple web browser interface. The assembly process was straightforward, especially with the available online resources, making it easy to get everything up and running in no time.What really impressed me was how seamlessly this kit integrates with my existing setup. The ability to power the system using PoE reduces cable clutter and ensures a clean and efficient installation inside my computer case. The performance is top-notch, allowing me to remotely reboot, access the BIOS, and easily manage my system. This kit has truly transformed the way I manage my Raspberry Pi projects, offering a level of control and flexibility that’s hard to match. This is an absolute must-have if you’re into Raspberry Pi projects and need a reliable KVM solution!
Derek Knight
Reseñado en el Reino Unido el 5 de mayo de 2024
Had a little difficulty getting the video to work due to little instructions with the item. More trial and error. The correct image for this item to install on your micro SD card(16GB minimum) is the "PiKVM V3 HAT BOX Image, OLED/FAN preactivated".With this resolved the item is working really well and if like others have said have 1.5 slot space in your PC/Server it really is a good IPMI alternative.
AP
Reseñado en Francia el 21 de octubre de 2024
Acheté pour mettre en place le KVM dans un serveur OpenMediaVault le résultat est bluffant !Simplicité d'installation et de configuration : tout est détaillé sur le wiki du projetLa compatibilité POE est clairement un plus par rapport aux autres produits de la marqueCerise sur le gâteau : le gestion ATX ! De quoi arrêter / démarrer / redémarrer les serveur à distance et surtout accéder au BIOS en cas de besoin
Productos recomendados