No hay artículos en el carro
No hay artículos en el carroCapacidad para hasta 4 pares de esquís o 4 tablas de snowboard. Portaesquís y tablas aptas para todos los vehículos todo terreno con rueda de reserva para portón trasero, derecha, izquierda o central. Los soportes diagonales permiten un ajuste firme para todos los esquís. Los topes de esquí incluidos permiten un transporte seguro también para esquís de fondo. Cierre con gancho de seguridad integrado que mantiene los esquís firmes, incluso cuando el usuario no está cerrado. Se puede convertir en un soporte de bicicleta o esquí. Sistema patentado de acero inoxidable – Fijación de cuerda con palanca de sujeción y cierres ajustables. Montaje sin herramientas. Con cerradura. Material: acero inoxidable y aluminio anodizado.
Ignacio Delgado
Reseñado en España el 23 de febrero de 2024
No vienen con mucha medida de cable por lo que medir la rueda bien antes.
fabrizio corrente
Reseñado en Italia el 13 de diciembre de 2024
Ho ordinato da subito i cavi prolunga dopo aver letto le altre recensioni ed in effetti servivano. Per il resto prodotto top, nulla da dire. Ma vogliamo parlare della bellezza della mia macchina?
mommy c
Reseñado en Estados Unidos el 24 de febrero de 2023
So for whatever reason there were multiple things wrong with the product that I received from the amazon distributor but ultimately I solved them and am overall happy with the product. Since there were so many issues I will outline them so that you too can get this working for you. First off, there was no instructions manual and I could not find this online. It is intuitive how this does go on. The bar that sticks out goes on top tire then the wires wrap the tire and then attach to the clap and clamp to close. Assembly requires attaching the two ski holders to the large metal form, they can only be attached in one orientation. Unfortunately also missing in the package were the screws for the assembly. I attached pictures of the one that worked well for me, I also used rubber rings with these bolts. You will also need one shorter one of the same type with wing nut to attach the clamp assembly. On my particular product one side of the ski holder assembly was missing one of the screws and the other was loose, to correct this I need to purchase longer hex top M6 screws (they are drilled for metric and the length of approx 6cm) to have these firmly secured. I noticed there was a problem when the ones of the other side were correctly installed. We have a 2022 Ford Bronco and there was no way the length of the wires were long enough to wrap the tire. The manufacturer sells adaptors but not here in the US only Italy. Since this is the case I had adaptors made made at my local ACE hardware store, 12 inches long worked for my car, and bought linkers. Definitely not ideal but it is a good product so I would like to see these things overcome for use for others in the future. It made it a breeze to load and unload our skis and since the Bronco has very limited choices to solve this ski issue, all worked out great! I would normally be super angry with all the problems but the cost of this on amazon was 1/2 as much for the same product as elsewhere and I felt satisfied when it was working correctly.
thomas aguillon
Reseñado en Francia el 6 de febrero de 2020
Super, facile à installer 3min. 6 ski sans problème.
hotwax_17
Reseñado en el Reino Unido el 8 de mayo de 2019
Wasn’t keen on spending the money... BUT allOther similar items were £500+ and not many others on market. Easy to install and I used this for my board + 2 kids boards and travelled 2,200 miles round trip and even on autobahn in Germany at 100mph with Jeep Wrangler JL it was solid. Very simple design and works great. Just bought the bicycle accessory for it to use in summer. Only downside, and not an issue for me, is that it blocks the reversing camera and you cannot make a custom whole as the tensioner for the mount is exactly in that place. Awesome product.
jmnoguera
Reseñado en España el 19 de febrero de 2018
los cables de acero eran cortos para la instalación en un land rover defender, los he tenido que alargar.no estaría mal que tuviera algún sistema de retención por si se corta o falla uno de los terminales que sujetan los cables.La estructura de aluminio es robusta y esta bien diseñada.
LX
Reseñado en Alemania el 26 de noviembre de 2017
Schnell geliefert, einfach zu montieren. Der Träger ist sehr leicht. Die Spannseile sind auf jeden Fall lang genug für die Standard-Bereifung meines Defenders (235/85-16). Da sind sicher noch ca. 10cm Spiel...Einen Punkt abgezogen gibt’s, weil die Bohrungen für die Schrauben nicht exakt gebohrt wurden. Aber die Montage war trotzdem ohne Weiteres möglich. Der Träger und die Skihalter sind mit einem Schlüssel abgesperrt und so vor dem schnellen Griff des Langfingers im Vorbeigehen geschützt (wenn er nicht gerade einen Seitenschneider für die Drahtseilchen oder eine 21er Nuss fürs Reserverad mithat...) Bin zufrieden!
Productos recomendados
