No hay artículos en el carro
No hay artículos en el carroDescripción del producto
Marko
Reseñado en México el 23 de agosto de 2024
Cumple con su función y es de buena calidad.
Carlos M.
Reseñado en España el 15 de febrero de 2024
Cumple de momento
J. D.
Reseñado en Francia el 22 de abril de 2024
A marché, pas trop dur à installer
Clint Gardner
Reseñado en Estados Unidos el 12 de agosto de 2023
Don't let some other reviews fool you about these being unsafe. It seems that there are some people reviewing these that understand how to use a multi-meter, but don't really understand how GPU's are powered. Yes, all of the ground pins are common as are the three 12v pins. This is NOT dangerous, and it is NOT a short as these people are implying. It seems they decided to use a single ground plane and a single 12v plane on the circuit board. The GPU only uses 12v and ground. As long as you're getting the proper signal on the proper pins, which all five that I've bought do, you're perfectly fine. If you were finding the ground and 12v bridged... that would be a short, and would be absolutely dangerous. Not a single one of these that I've bought have had a short. You can ignore the reviews saying these are unsafe because the grounds are all common as well as the 12v, and that's perfectly safe for this applications. These people simply do not understand what they're talking about.As to the rest of the product. They do what they do well, they're constructed about as well as you can expect them to be and they look quite good... much better than the majority that just put some foam on the back to protect the exposed circuit board. Above all else, they're safe to use. My one complaint is that there is no latch, which makes sense if the latch is on the inside of the connector as it would be very hard to reach. However, once connected, the connection is pretty snug and they don't back out easily.I'm using a different set on a 3070 Ti and they've been working great. I was using this set on a 3080 Ti, but opted to go with the Thermal Grizzly WireView. Not for any shortcomings of this product, but the way I have the GPU setup and my custom cables, it was pulling on these in a way I didn't like and the WireView is a single block making it more ridged for this application. It's also nice that it can display how much wattage and current the GPU is currently consuming in real time. However, it is quite a bit more expensive.If you need a 180° adapter and you don't want to spend a lot, but you want it to look nice, these are a must. Just be sure that the orientation is correct for your GPU. A lot of people are giving these bad reviews because they didn't read and bought the wrong kit. If you're willing to spend more and you'd like to be able to see the current power consumption, I highly recommend the Thermal Grizzly WireView.
I want that one
Reseñado en el Reino Unido el 5 de junio de 2023
At last - begone dangly wires!These suit the 7900 Nitro really well and also the 'mini' Wraith Ripper, but my sense of aesthetic may differ to yours.I think they finish off my pooter great, no problems installing and work fine.After someone else's review it is a good idea to check each one singly just in case but I've had no trouble with mine.10/10 nice one!Edit. Having seen the one star reviews whinging about can't run a "powerful" card I can attest that the card I have pulls over 430w when under load and not even a blip. No smoke, spontaneous combustion, death from electrocution.One of them even chopped up the adaptor to make it fit.I would suggest their problems are ID ten T issues rather than with the products- they`re perfectly good.
Mateusz
Reseñado en España el 9 de noviembre de 2023
Viendo la calidad del plastico yo no me juego meter ahi dos cables que consumen cada 200watts con una grafica de 1000 euros
Roberto
Reseñado en España el 24 de noviembre de 2023
Con este producto los cables van directamente a la tarjeta gráfica y no se notan, parecen se buene calidad y no he tenido problemas para ahora
Paula De Francisco Taracido
Reseñado en España el 18 de enero de 2023
Se ve de calidad, pero lo devolvi porque tenía que haber cogido otra orientación de los pines
Marcos L.
Reseñado en España el 20 de abril de 2023
Más que satisfecho con la calidad y estética que le dá a la gráfica esta simple pieza, las 5 estrellas que le doy también van para el vendedor porque ante un problema que hubo en todo momento respondió y resolvió rápidamente.
Jonas Isenbart
Reseñado en Alemania el 3 de octubre de 2022
Viele Leute bewerten den Artikel schlecht, weil sie vorher nicht überprüfen, ob sie die STD- oder die RVS-Version brauchen. Einfach die PCIe Stecker von der Grafikkarte abziehen und die Anschlüsse vergleichen. Dauert keine 2 Minuten. Die Stecker passen genau und sehen dabei auch noch sehr gut aus.
Cisco.HJ
Reseñado en España el 3 de abril de 2022
En ningún lado informa de los watios que soporta y si a eso lo sumas que todos los positivos en el adaptador se juntan en uno, al igual que los negativos, para una RTX 3080 con un consumo de más de 400w no me fiaría mucho de que no se derritan y pase algo peor, para gráficas con menos consumo no veo problema.Por otra parte fijarse bien en donde está la pestaña de conexión de las pcie, ya que de lo contrario quedarán montados al revés y no valdrán.
J5333JF
Reseñado en España el 23 de noviembre de 2021
Funcionan perfecto y son tal cual indica el anuncio. Los he usado con una MSI RTX 3080 y una caja Talius Cronos. Con esto la grafica cabe perfectamente en la caja, ya que los cables pegaban contra el cristal.No tiene clic a la hora de engancharlos a la grafica, porque seria imposible quitarlos una vez puestos, pero si que lo tienen en donde van los cables PSU.
Productos recomendados