No hay artículos en el carro
No hay artículos en el carroStarlock Hoja de sierra de inmersión Starlock Carbide AIZ 32 AT Metal. Cambio del accesorio en menos de 3 segundos
Inri
Reseñado en Alemania el 26 de noviembre de 2024
Schnelle Lieferung, Teil funktioniert
jonathan verrier
Revisado en Bélgica el 22 de febrero de 2023
J'ai utilisé cette lame pour coupé quelques clous la lame n'a pas tenue elle est morte au bout de quelques clous a peine
Charles Fernandez
Reseñado en Emiratos Árabes Unidos el 29 de marzo de 2021
Awesome product but expensive
RiccardoDV
Reseñado en Italia el 20 de enero de 2021
ottimo prodotto
Dave
Reseñado en el Reino Unido el 26 de abril de 2017
I used this blade on a Dewalt Cordless Brushless Multitool, having read reviews of various blades before deciding this one was the best for my needs. The equivalent Dewalt blade is known to wear out very quickly after cutting one or two nails, whereas this blade is reputed to do better.I had two copper pipes which were in the wall and at a difficult angle, with too little clearance to use a pipe cutter. I cut through both of these pipes, taking about 60-90 seconds each, after which I inspected the blade to find zero visible damage. Then I tackled two more, thicker, copper pipes in the floor. Again, easily tackled with zero visible damage.Next up, iron. First, a thick iron screw. The blade chopped it off easily, but I could see some very minor damage to the teeth afterwards. Then, two thick iron pipes which needed to be cut off above the ceiling boards, with only a small gap to work through. No space for an angle grinder, so back to the Dewalt multitool and Bosch blade combo. These pipes were harder to cut, taking a few minutes to get through. After cutting the first pipe, the blade was substantially blunted. Nonetheless, it got through the second thick iron pipe too, just with a little more effort required.The only minor downside is that the Starlock system isn't fully compatible with the Dewalt multitool and requires Dewalt's blade adaptor. This adaptor comes in the multitool box, but it doesn't hold the blade as tightly as it does Dewalt made blades that don't require the adaptor. As a result, the blade tends to rotate in the tool while in use, meaning you need to occasionally descend from the ladder and adjust it with an allen key - this happened perhaps 3 or 4 times per pipe. Obviously, this will only affect you if you're also using a Dewalt rather than Starlock multitool.All in all, a great option for cutting through tough metal objects in tight spaces.
Productos recomendados
