Carro de la compra

No hay artículos en el carro

No hay artículos en el carro

24V/48V/60V/72V a 24V 20A Buck Convertidor de Potencia DC-DC Transformador Reductor de Fuente de Alimentación Convertidor Buck para Interruptores de Equipos CNC Paneles Fotovoltaicos y más

Envío gratis en pedidos superiores a 25.99€

33.99€

16 .99 16.99€

En stock

Acerca de este producto

  • Convertidor de potencia: DC 24V a DC 12V 10A convertidor de potencia con un rendimiento estable y la eficiencia de conversión por encima del 95%; Durable y mejor protección contra el calor; El encolado interno y caja exterior de aleación de aluminio, con una excelente fluidez
  • Rango de voltaje: Rango de tensión de entrada: 24V; Tensión de salida: 12V; Corriente de salida: 10A; Potencia máxima de salida: 120W; Tamaño pequeño y fácil de colocar en cualquier aplicación; El convertidor es a prueba de golpes, impermeable, a prueba de polvo, estable y de calidad fiable
  • Protección inteligente: Soporta protección contra cortocircuitos de salida, protección contra sobrecorriente, protección impermeable IP68 y protección contra sobretemperatura; Temperatura de funcionamiento -20℃ a 65℃, cuando la temperatura ambiente de trabajo ≥40℃, con el fin de prolongar la vida útil de la fuente de alimentación, por favor utilice la corriente de salida nominal ≤40%
  • Fácil de instalar: Pelar el cable de unos 10 mm, tire de la llave de refuerzo 90°MAX, inserte el cable, presione la llave de refuerzo con fuerza; El convertidor tiene un cable rojo, amarillo y negro, el rojo y el amarillo están conectados al electrodo positivo, y el negro está conectado al electrodo negativo
  • Amplia aplicación: Una amplia gama de uso, el excelente reductor de voltaje se puede utilizar para las tiras de luz LED, sistemas de monitoreo, carros de golf, paneles solares, faros de automóviles de altavoces


PARÁMETROS DEL PRODUCTO

Rango de entrada: 24 V

Eficacia de transferencia: 95%

Línea de entrada: 15 a 16 CM, R+ B-

Tensión de salida: 12 V

Salida: 10A MAX

Salida máxima: 120W MAX

Tasa de regulación en vacío: 2%

Tasa de regulación en carga: 3%

Temperatura de funcionamiento: -20 a 65

Temperatura de almacenamiento: -40 a 85

Humedad de trabajo: 10% a 90% RH

Clasificación de estanqueidad: IP68

Protección contra cortocircuitos: SÍ

Protección contra sobretemperatura: SÍ

Protección contra sobreintensidad: SÍ

Protección anti-conexión: SÍ

Método de disipación de calor: Disipación natural del calor

ATENCIÓN

1.Los productos se almacenan en un lugar seco y fresco con una temperatura entre 40℃ y 80℃, evitando el contacto con sustancias corrosivas y manteniéndose alejado de llamas y fuentes de calor

2.No utilice el dispositivo cerca de una fuente de calor, como un fuego o un calentador

3.No conecte la línea de entrada a la electricidad de 220V

4.No ponga el producto en el fuego ni lo caliente

5.No cortocircuite los polos positivo o negativo del producto con cables u otros objetos metálicos

6.Está prohibido que personal no profesional desmonte y repare el producto por sí mismo


CYBER BEAR
Reseñado en Estados Unidos el 1 de julio de 2024
This is a step-down buck converter that takes 30-80 volt electricity and turns it into a 24-volt stable electric DC power supply that can be used with LEDs, and more. This is a premium grade convertor. I bought an inexpensive ($16) 48 volt 4 amp (200 watt) power supply on Amazon. The name is as follows:NOYITO AC to DC 48V 4A Isolated Power Supply Module AC 120V (100-240V) to 48V 4A 192W Peak 5A 240W Max Power Module with Overcurrent Overload Short-Circuit Protection (DC 48V 4A, Blue)The switching power supply is small and inexpensive, with little capacitance on board to keep the DC voltage steady, It need an electrical stabilizer.At this point, the product conditions the electricity appropriately to drive the LED strip light. Any input DC voltage between 30v and 80v, no matter what amperage, is drawn, up to about 200 watts input and output. The step-down buck converter puts out a rock-solid 24 (23.91) volts and is built to concert up to 200 watts or 20A at 24V. It is exceptionally well made and could not be easier to use. It is fully waterproof, and the connectors are excellent. Strip the end of the appropriate wires and follow the labels on the convertor; pop up the four little connector levers, place the wire in the appropriate holes clearly marked on the converter, and push the levers down. You are done—easy, exceptional performance at a reasonable price. You end up spending less than $40 for a waterproof, tough, rock-solid LED power supply/drive that far exceeds the performance of a wall wart, which likely would cost approximately as much, if not more. I feel the 20 minutes it took was well worth it. It is very highly recommended; this item has a multitude of uses. If you need to have done what it does, you will be happy with the choice and the longevity of the electrical supply system. They can be mounted in a plastic project box or if the back is insulated or non-conducting stand-offs. I am screwing them to the wall in a place where they can't really be seen. They are both surprisingly small. I will post more pictures as soon as they are installed; I fully tested them, and I just need to peel off the sticky back covering and stick them to the wall.
Productos recomendados