No hay artículos en el carro
No hay artículos en el carroPAR6408A 1-port IEEE1284 Parallel PCI Express Board. Expands single IEEE1284 Parallel LPT port on system. High reliable SUNIX SUN2212 native PCI Express IEEE1284 controller on-board. Designed to meet PCI Express Base Specification Revision 2.0. Full single-lane (or x1) PCI Express throughput. Support IEEE 1284-1994 parallel port standard * ECP (Enhance Capacity Port) / EPP (Enhance Parallel Port) * SPP (Standard Parallel Port) / BPP (Bi-direction Parallel Port). Plug-n-Play, I/O address and IRQ assigned by system. Certified by CE, FCC, RoHS, and Microsoft WHQL approval. Support Microsoft Windows, Linux, and DOS.SUNIX PAR6408A IEEE1284 Parallel communication board meets the PCI Express Base Specification Revision 2.0. It is compatible with PCI Express x1, x2, x4, x8 and x16 lane bus, allowing it to be installed in any PC-based system structure. With SUNIX PAR6408A IEEE1284 Parallel board, users can expand single parallel LPT port to their system to use parallel devices further. It is ideal for printers, IC programmers, ZIP Drives, or other Parallel devices*. SUNIX PAR6408A built-in SUNIX high performance and realizable native PCI Express controller, and as well built with many of SUNIX advanced features and technologies, making it the advanced and high efficient solution for commercial and industrial automation application. Note: * LPT port does not support LPT Key Locker Parallel device. * LPT port does not support legacy 278/378/3BC ISA address under Microsoft Windows nor Linux operation systems. * ECP / EPP / SPP / BPP modes work under Windows, and Linux driver only supports SPP mode.Parallel Communication Interface IEEE1284, FIFO 16byte Hardware, Mode SPP / ECP / EPP / BPP, Speed Maximum 1.8MBps, PCB Connector DB25 Female.Windows Linux Dos
