Quality

Jag testade och fungerar bra, men du för använda med dator så du kan öppna alla dina filer. Jag testade med lenovo tablet och iPad 11 PRO , men när kopplade till dator kunde öppna alla filer de andra kunde inte.

Prodotto ottimo, ben realizzato e ben funzionante che mi ha permesso di leggere un vecchio hard disk

Muy compacto el diseño,muy sencillo de utilizar. Pero no le sirve para un disco duro sata antiguo del año 2000.

Va muy rápido. Se nota solido y de buena calidad.He recuperado discos ATA de +20 años.

Estoy muy contento. Tengo discos duros antiguos, y me ha venido genial para recuperar información y arreglarlos.Con la interfaz USB 3.0 se hace menos tedioso la transferencia de datos.Luego, la calidad es buena.

Parfait pour cloner un hdd vers un ssd. Système compris.Un système en forme de docking serait encore mieux, mais c'est déjà très appréciable.Je recommande.

Muy sencillo de usar, funciono de maravillas para recuperar archivos de DD que tenían mas de 10 años guardados.

Pues no hay mucho que decir, funciona bien con IDE que es con lo que yo lo he probado para rescatar HDDs viejunos.

Probado con dos HD, dos DVD-ROM e incluso una unidad de disco de 3,5, y su funcionamiento es perfecto.Pero tiene un problema de instalación en las unidades de DVD, al menos con las dos que yo he podido probar, y es el siguiente: en dichas unidades de DVD, el conector IDE y el de alimentación MOLEX están juntos, y el chasis del conversor impide conectar el MOLEX a la unidad DVD. He tenido que cortar el saliente que tiene el conector MOLEX que se utiliza para poder empujar al instalarlo y posteriormente tirar de él para desconectarlo, y aún así he tenido que forzar el chasis y el conector MOLEX para que pudiera conectarlo, cosa que finalmente he podido hacer

Es muy útil y funciona bastante bien. Te permite conectar y acceder a varios discos duros de forma simultánea e incluso te viene con un adaptador para conectar discos IDE de portátiles antiguos.El único defecto que le veo es que es relativamente lento. Para un HDD va más que sobrado, pero los SSD los limita a como mucho 250MB por segundo. Con una caja externa para SSD que tengo, en el mismo USB y con el mismo disco duro alcanzó los 470MB por segundo, que es cerca del límite del SSD, por lo que sé que el puerto USB del ordenador no es el cuello de botella.

Lo he comprado para poder acceder a discos duros IDE y Sata de ordenadores viejos desde mi portátil actual. Por ahora cumple su función. Lo compré sin función de clonación porque no me interesaba, solamente lo quería para recuperar fotos y datos puntuales. La velocidad de transferencia de datos es fluida y el ordenador (lo probé desde un Mac) reconoce los discos sata sin problemas. El ide lo reconoció pero no podía acceder a él, probablemente porque el formateo que llevaba, ya que era un hd bastante viejo (3gigas), no era compatible con el Mac o sencillamente estaba estropeado el disco por viejo y mal cuidado (llevaba rulando por casa de mi padre varios años, sin protección alguna). El sata una vez extraidos los datos que me interesaban lo formatee desde el mac (se calentó mucho el disco pero entiendo eso es algo normal y no es culpa del lector. Le puse un ventilador pequeño de los chinos mientras lo formateaba para rebajarle la temperatura) y todo perfecto.

I've done two main things with this device. I've attached two SATA drives and cloned one to the other using the One Touch button. That worked without issue. You have to have the destination drive be the same size or larger. I also connected multiple drives to the device and then connected the device to a PC to use software for more complicated jobs. You can use a free software like Macrium or Easeus Partition, both of which are easy to use and will allow you to copy partitions from a drive to another without copying the whole disk.If you connect a single SSD (and maybe even a standard mechanical 2.5" disk) to it and connect to a PC, you don't need the power adapter. But if you attach two, you do. If you are doing something time-consuming and resource intensive such as cloning, I would recommend attaching the power cable even if you have only a single drive attached.The only issue I ever had was when I was trying to upgrade my main PC's Windows 7 installation to Windows 10, and the the program would fail because my PC was losing its connection with the attached SSD. I don't recall if that was due to my corrupted Windows 7 installation or if I had neglected to plug in the power adapter. Either way, I got it resolved and was able to complete the transfer. I had loads of trouble getting this Win7 install to upgrade to Win10, but that had nothing to do with this device.When I upgraded another Win7 install to Win10, I pulled the drive out of the laptop and did the One Touch cloning. That worked without any issue at all. I plugged the new drive into the laptop and went about upgrading to Win10 (I didn't want to upgrade the old drive to Win10 just in case there were issues during the upgrade process as there were when I upgraded the OS on my desktop). That upgrade went through without any issue.I had a 3rd laptop running Windows Vista. I wanted to upgrade it to Win7 and then upgrade that to Win10 (you can't go directly from Vista to 10). I ran into two issues, neither of which were related to this device. I ended up using this device quite a bit as I had significant software issues during this upgrade, and I ended up wiping drives and re-cloning multiple times.If you are going to upgrade from Vista to 7 to either stop there or upgrade further, you need to do one of two things if you don't have an advanced format disk and want to move to an AF disk (like a SSD, though it may be the case that any hard drive made today would be AF). If you are running Vista, chances are you do not have an AF disk, so if you want to freshen up an old PC and upgrade your OS and move to a SSD, you need to either upgrade to Win7 on the current disk before cloning or you need to download and install a couple of hotfixes and potentially some additional software. The hotfixes are KB2470478 and KB2553708. You might also need RST driver 9.6 or higher if you have an Intel SATA controller. If you clone first and try to upgrade to Win7, the install will not go through. If you clone first, you can still install the hotfixes, but you'd then have some extra steps because you won't be able to install a hotfix. It's much easier to install the hotfixes before you clone.Now back to this device. I've had it for 7 months. It's worked great for cloning but also for simply attaching a drive to it and then accessing that drive on another computer. I don't have any complaints about it in regards to its intended purpose.The one thing I would say, though, is that I wish they had included a cord, or two cords, to connect a SATA drive in a machine to this device. As it is, you connect the device directly to the drives, no cables involved (other than with the IDE drives and the power connector). I had an SSD in a desktop and had to install it with a 2.5" to 3.5" adapter so that it would sit in the case. This meant that if I wanted to clone that drive, I'd have to remove it from my case. However, if I could connect the device to the drive via cables, that would add flexibility to this. Granted, this is an edge case, and I assume that most people would be using this device because they want to replace one hard drive with another. Still, it'd be nice if I didn't have to attach all of the drives onto the device itself.