No hay artículos en el carro
No hay artículos en el carroJUANJO
Reseñado en España el 9 de marzo de 2025
el detector de gases viene sin certificado de calibracion, con lo cual no vale para nada y es un riesgo SU USO
desertfoxminerals
Reseñado en Estados Unidos el 29 de marzo de 2025
I'll start with the only two cons I can think of for this unit: It is not MSHA-certified, and it really should be. It does not detect CO2 levels, and it really should.Every open-air test I can throw at it, from breathing on it to drop O2 levels, generating hydrogen sulfide gas outdoors in a woulfes bottle and setting it near the output, letting pure O2 from my welding tank flow over it to raise O2 levels, letting acetylene from my other welding tank flow over it to check for LEL, and putting it near one of my dirty-burning propane torches for Carbon Monoxide all made the gas meter respond, and respond pretty quickly. The alarm is loud, the vibration could maybe be a bit stronger, and the LEDs are bright enough for the typical use case - lower-lighting areas of industry and mining.Operation is as simple as turning it on and letting it go through its boot cycle. Seriously. You don't need to play with anything. Wait a few seconds as the stats fly by, and you'll be greeted with a readout for all 4 sensors. That's all the functionality you need, and there are password-protected settings (that you aren't given the code to) to make adjustments (for calibration techs only.) You can cycle through various views but in reality that starting screen is the one your life is going to depend on. You can do other things with it, but I only bought this for gas detection while in action, so I won't be using the other features. You may find those useful and functional.I do not see the sensors as being replaceable, they appear to be long lasting electronic ones instead of chemical cartridges, so I would absolutely recommend that you have a company calibrate this unit yearly as the manufacturer recommends. That way, this unit will continue to reliably keep you safe from gas dangers in your work environment.
Roger S
Reseñado en Estados Unidos el 19 de febrero de 2025
I have only had a chance to test this in benign environments, but it seems to work well. I tested with methane, CO, and O2. Was not able to test with H2S. Response time is a matter of seconds both in rising and falling concentrations of gases. Tested at home and in a large shop. I don't have the equipment to test for accuracy, but it does alarm in environements where it should. One thing to note is that this device has 4 sensing ports on the face of it, so it's best for ambient monitoring. It doesn't have a "nose" that you can point at something or into some place to see what's there. Not a bad price point for what you get.One other review mentioned CO2. This device tests for carbon monoxide, not carbon dioxide, so this would be of no use in a horticultural environment - unless you want to measure oxgen content.
Review Extraordinaires
Reseñado en Canadá el 17 de febrero de 2025
We've been testing this gas monitor around our house for a short while now and love having it around for moments when we're questioning any gas leaks, especially from our old furnace in the basement that we're keeping a close eye on especially during these super cold months.It comes in an awesome little hard shell case that has a handle and 2 clips on either side to keep it closed. The gas monitor is inside along with a charging cable. Shame it's not USB-C but it's not a huge issue.The monitor itself is incredibly easy to operate and quite foolproof. A power/select button in the middle, along with an up and down navigation. The screen is clear and easy to read and allows for quite a bit of customization/selection between the various options and detection modes. I am yet to actually detect anything, which is a very good thing, but I have no doubt that this will alert us loudly just by how loud the selection beeps are when navigating the menus.Awesome gas monitor overall! I have no doubt of its abilities to actually detect gas because of the huge sensors that are present on it, as well as the array of features and options built into it.
BD
Reseñado en el Reino Unido el 16 de febrero de 2025
This feels like a very valuable piece of kit to have on hand. It comes in it's own box which makes it feel very expensive. We've tested it out and it's relatively simple to use and to follow the instructions. Very quick response time as well for readings.
JasonW
Reseñado en el Reino Unido el 14 de febrero de 2025
This gas detector is a tough, reliable tool that helps keep you safe at work, in clean rooms, or other environments. It picks up on carbon monoxide, hydrogen sulfide, oxygen levels, and explosive gases in just half a second and warns you with sound, lights, and vibration if something’s wrong.It’s easy to use—just clip it to your belt or keep it nearby, and it does the work for you. In clean rooms, it adds an extra layer of safety by making sure oxygen levels stay right and no harmful gases go unnoticed. It’s useful if you work with chemicals or need extra protection in certain environments.The case is very tough and built to last, so it can handle rough environments. The battery life is solid, so you don’t have to charge it constantly. The only small downside is that the screen turns off quickly, which can be annoying when you want to check the readings often.Overall, this is a reliable, well-built gas detector that’s easy to carry, simple to use, and gives you quick warnings when needed.
Productos recomendados
